Survey of quantity and quality of hazardous wastes produced in Sistan and Baluchestan in 1386

AUTHORS

Edris Bazrafshan 1 , * , Ferdos Kord mostafapour 1

AUTHORS INFORMATION

1 Research Center of Health Promotion and Social Development, Zahedan University of Medical Science and Health Services, Zahedan, Iran

How to Cite: Bazrafshan E, Kord mostafapour F. Survey of quantity and quality of hazardous wastes produced in Sistan and Baluchestan in 1386, Zahedan J Res Med Sci. 2008 ; 10(4):e94509.

ARTICLE INFORMATION

Zahedan Journal of Research in Medical Sciences: 10 (4); e94509
Published Online: May 14, 2008
Article Type: Research Article
Received: February 12, 2008
Accepted: October 07, 2008

Crossmark

CHEKING

READ FULL TEXT
Abstract

Background: Rapid growth of technology and synthesis of thousands of new chemical
compounds along with rapid growth of population have lead to production of industrial and
hazardous wastes. Unfortunately in Iran, the industrial wastes are not managed suitably and
efficiently; also there is not exact data about the rate of hazardous waste production. So, this study
was performed to quantify and qualify the rate of hazardous waste production in Sistan and
Baluchestan province.
Materials and Methods: This cross-sectional descriptive study was performed in active
industrial units in Sistan and Baluchestan province in 2007 to determine the quantity and the
quality of hazardous wastes. The required information was collected using a questionnaire and
inspecting and sampling from liquid and solid wastes of active industrial units in the region. The
concentration of heavy metals in hazardous wastes was measured by atomic absorption methods.
Also, the quantity of hospital wastes were determined based on the rate of produced wastes per
each active bed.
Results: The results of this study showed that the major part of hazardous wastes is in solid form
(3400 ton per year) and is produced by active industrial units (more than 80%) which have no
suitable place for collection and storage of wastes. Also, the total liquid waste production was 820
m3/year and the amount of daily hospital waste production was 5549 kg.
Conclusion: According to our findings, it is necessary to establish a suitable and efficient
management system to protect environment from hazardous waste products. Also, considering a
suitable site for final disposal of waste products is useful to prevent dispersion of waste materials.

Keywords

Hazardous wastes management Heavy metals Industrial wastes Sistan and Baluchestan

© 2008, Zahedan Journal of Research in Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/) which permits copy and redistribute the material just in noncommercial usages, provided the original work is properly cited.

Fulltext

The full text of this article is available on the PDF file.

 

References

  • 1. The References of this article are available on the PDF file.
  • COMMENTS

    LEAVE A COMMENT HERE: